Archive | pillow RSS for this section

make your own bobbin lace pillow: bolster pillow

I took on bobbin lace-making while living in Korea, out of all places. Far away from home, the Internet became both my teacher and companion.

Inspired by this Russian website (text in English), I made my first bolster pillow using nothing more than a Coke bottle filled with water for weight, batting from an old pillow, and some leftover curtain fabric.

Though it ended up being less than perfect – the amount of batting I had was only about two thirds of what I needed and as a result, the pillow was at places bumpy and soft – I learned many a valuable lesson on it. It also taught me that there is no reason why bobbin lace-making should be an expensive hobby. So far, I have been able to make  all that I need (be it bobbins, two bolster pillows or a smaller cookie pillow) with either household items or widely available craft supplies.

I have been using the bolster pillow I made to replace the one I had left behind in Korea for almost a year now, and I love it! It gets its weight from a muslin sack filled with 5 pounds of sand. The core is covered with a single layer of upholstery foam, the edges of which are sewn together. [Had I had more of this foam, I’d have used two layers to end up with a “chubbier” pillow.] The whole thing is furthermore wrapped in 5 layers of black, denser foam sheets. To protect the foam and to provide a washable working surface, the final layer is made out of black knit case, ends of which are firmly tied together.

While the sand makes this pillow really sturdy and stable, it needed a stand that would prevent it from rolling over. Back in Korea, I was using a stiff wine set gift-box and loved it so much that I made my new pillow fit a shoe box I wrapped in some leftover fabric. The box provides just enough support, and stays put not only because of the weight of the pillow, but also thanks to non-slip drawer liner attached to the bottom of it.

This slideshow requires JavaScript.

To make your own bobbin lace-making pillow, you will need:

  • thread, needle, safety pin, sewing machine
  • muslin
  • 5 lb of sand
  • 0.5-inch upholstery foam
  • artistic foam sheets
  • knit fabric
  • string or ribbon

Process:

  1. Sew a muslin sack to fit a shoebox you want to use. Leave a small opening in one corner.
  2. On the opposite end, fold both ends over and stitch them together to create a flat bottom.
  3. Place the sack flat-side down in a mug to keep it stable. Through the opening in the seam, fill it with sand.
  4. When the sack is packed full, stitch the opening shut.
  5. Create another flat end by sewing the corners on this side together.
  6. Measure a rectangle piece of upholstery foam big enough to wrap around the sack. Sew its edges together.
  7. Wrap the upholstery foam in several layers of denser foam. Test the thickness by pushing a pin through the layers – you should not feel the sand even if the pin is pushed all the way in.
  8. Sew a knit fabric tube that fits snugly around the pillow. Fold the fabric and create casings on both ends.
  9. With a safety pin, insert a ribbon through the casings. Tie the ribbon on one end firmly into a knot. Insert the pillow, and tie the other ribbon into a double bow (use this end to wash or replace the cover, when necessary).
  10. Use your bolster pillow supported by a shoebox. For increased stability, staple or glue a non-slip drawer liner to the bottom of the box.
Follow

Get every new post delivered to your Inbox.